Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index#

Monitor Input Level (4460)

  1. Click on Status/Statistics, Voice, and Voice from the navigation window

    2. You will see the Voice Channel Statistics window.

  2. At the top of the window, click on Status. You will see the Voice Channel Status window:

    3. The input level for the voice channels is displayed in the column next to the Network Connect column.

  3. If the observed input level is other than -4 dBm, add gain (positive or negative), as necessary. The input level adjustment is performed in two steps. First determine the profile number associated with that channel, then access the input level set command for that profile and make the necessary adjustment. Record the setting.
  4. Observe the output level of the second voice module as displayed by the second VNA.
  5. If the observed level is more positive than -12 dBm, add output level attenuation in the required amount. If adjustment is necessary, first find the profile number of the second voice channel, then adjust the output level attenuation of that profile, and record the amount of adjustment made.
  6. Use the recorded data to set the input level of the second voice channel and the output level of the first voice channel.

End Of Topic

Nortel Networks LogoContact us by email
Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index