CLI Procedure for Adding an RSI Server
This command is used to assign a network server to the RSI by DNA address and name, and specify whether the server is to be primary or secondary.
To access the Add RSI Server command, follow this path:
CLI>add rsi server
| Parameter | Range of Values | Required Action |
|---|
| <DNAAddress> | "String" (1..40) | Enter a string between 1 and 40. It represents the DNA address of the RSA assigned to the Passport 4400, and is provided by the network administrator. |
| <ServerName> | "String" (0..50) | Enter a string between 0 (no name assigned) and 50. It is the name assigned to the local Passport 4400 by the user. |
| <ServerType> | primary | secondary | Specify whether the RSA assigned to the Passport 4400 is the primary or secondary (backup) access. |
|
Note:
- When provisioning the VNCS on the Passport 6400, be sure that the dial plan used is 0; it is the only dial plan recognized by the Passport 4400 unit.
- All Add commands take effect after the changes have been saved and the Passport 4400 unit has been reset.
|
End of Topic
