Add OSPF Neighbors

1. At the top of the OSPF Configuration window, select Neighbors. You will see The OSPF Neighbors window:



2. At the top of the window, select Add a Neighbor. You will see The Adding an OSPF Neighbor window:



See the table below for a description of the required parameters:

Parameter	Range of Values	Required Action
IP Address	IP Address	Enter the IP Address of the OSPF unit you want to configure as a neighbor
Priority	INTEGER (0 - 255)	1 is the default. Enter 0 if you want to designate the unit as a Designated Router. The higher the number the higher priority.



3. Click Save. A "Command Successful" appears.

Continue on to Save the Configuration