Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index#

Modifying a NAC Server (NAS)

To modify a NAC Server, use the Configurator procedures below. You cannot set any parameters with this procedure unless the server already exists:

  1. Select Configure, System, and NAC Server from the navigation window.

    2. You will see the NAC Server window:

  2. Locate the desired server in the table and click on the Modify that correlates to that server. You will see the Modify a NAC Server window:

  3. When all desired changes are made, click on Save.

End of Topic

Nortel Networks LogoContact us by email
Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index