To add a NAC Cache, use the Configurator procedures below:
Select Configure, System, and NAC Cache from the navigation window.
You will see the NAC Cache window:
At the top of the window, click on Add a Cache Entry. You will see the Add a Cache Entry (NAC) window.
The optional parameters for adding a NAC cache entry are described below:
Parameter
Range of Values
Required Action
Egress (local) String
"String" (1..40)
Enter a number from 1 to 40 digits. This is the telephone number located at the DNA address specified in the DNA string. Example: 123.
DNA Address
"String" (1..34)
Enter the address where the telephone number entered in the Egress String is located. Example: [x121]9876200. Note that the suffix "200" indicates that this is a voice call, and it must be added to all static cache entries. For learnt entry (resolved from NAS), the suffix "200" is automatically appended to the DNA.
VoIP Address
IP Address
Enter the IP address to be used if the call is Voice over IP, in the format n.n.n.n.
Enter 0.0.0.0 to use the same IP address as the one designated for the Ethernet port on this Passport 4400 unit.
When all parameters have been entered, click on Add. A "Command Successful"message appears.
End of Topic
