Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index#

Adding a NAC Cache (entry)

The Add NAC Cache subcommand is used to add an entry to the static part of cache.

CLI> add nac cache

Parameter

Range of Values

Required Action

<EgressString>

"String" (1..40)

Enter a number from 1 to 40 digits. This is the telephone number located at the DNA address specified in the DNA string. Example: 123.

<DNA>

"String" (1..34)

Enter the address where the telephone number entered in the EgressString is located. Example: [x121]9876200. Note that the suffix "200" indicates that this is a voice call, and it must be added to all static cache entries. For learnt entry (resolved from NAS), the suffix "200" is automatically appended to the DNA.

<EntryStatus>

add | active

Enter add. (Active is currently not a valid option).

<EntryVipStatus>

IP Address

Enter the IP address to be used if the call is Voice over IP, in the format n.n.n.n.

Enter 0.0.0.0 to use the same IP address as the one designated for the Ethernet port on this Passport 4400 unit.


End of Topic

Nortel Networks LogoContact us by email
Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index