CLI Procedure for Defining Multiple Frame Relay Switch Maps

Switch Maps for Site 1

The switch maps for Site 1 are as follows:

• DLCI 100 to DLCI 100 at Site 2
• DLCI 101 to DLCI 201 at Site 3
• DLCI 102 to DLCI 102 at Site 4

Enter the following CLI commands:

CLI> add fr switch map 152 100 100 "302181140042311" master frdce

CLI> add fr switch map 152 101 201 "302181142020321" master frdce

CLI> add fr switch map 152 102 102 "302181144021322" master frdce

Switch Maps for Site 2

The switch maps for Site 2 are as follows:

• DLCI 100 to DLCI 100 at Site 1
• DLCI 200 to DLCI 202 at Site 3

Enter the following CLI commands:

CLI> add fr switch map 152 100 100 "302181139710311" slave frdce

CLI> add fr switch map 152 200 202 "302181142020321" master frdce

Switch Maps for Site 3

The switch maps for Site 3 are as follows:

• DLCI 201 to DLCI 101 at Site 1
• DLCI 202 to DLCI 200 at Site 2

Enter the following CLI commands:

CLI> add fr switch map 161 201 101 "302181139710311" slave frdce

CLI> add fr switch map 161 202 200 "302181140042311" slave frdce

Switch Maps for Site 4

The DLCI at Site 4 is mapped to DLCI 102 at Site 1. Enter the following CLI command to define this switch map:

CLI> add fr switch map 164 102 102 "302181139710311" slave frdce

End of Procedure

End of Topic

Optional Frame Relay Parameters