Busyout Mode

The Busyout Mode parameter is used to select one of the following three methods for controlling the busyout state of the channel:

• System Controlled -- this option places the voice/fax channel in a busyout state during link outages of 40 seconds or more, or when there is not enough bandwidth available to support the voice/fax channel.
• Forced On -- this option forces the voice/fax channel into the busyout state. This option is used to disable an intermittent or defective voice/fax channel until it can be repaired.
• Forced Off -- this option prevents the channel from going busy, even during link outages or congestion. This option is normally used when testing the channel.

Note: When the channel is in the busyout mode, the channel indicator will be flashing red every second.