Voice Algorithm Negotiation (Passport 4460)

The voiceAlgNegotiate subcommand specifies the preference for the voice algorithm when an outgoing call is made. Up to three algorithms may be selected, separated by a comma. The sequence represents the priority. When this parameter is configured, it takes precedence over the Digitizing Rate configured in CLI Procedure for Setting the Voice Profiles (4460).

Note: If your network contains a Passport 4430/50/55 unit, it is important that G.729 is one of the algorithms selected (the Passport 4430/50/55 unit only supports G.729).

To set the desired voice algorithm negotiation settings, enter:

CLI> set voice switchingProfile voiceAlgNegotiate

Parameter

Range of Values

Required Action

<Profile>

INTEGER (1..60)

Enter the number of the voice profile you are configuring.

<VoiceAlgNegotiate>

"String" of:

G.729-20ms, G.729A-20ms, G.729B-20ms, G.729AB-20ms, G.711-5ms

Select up to three algorithms separated by a comma.

End of Topic