Tx Priority
The txPriority subcommand is used to set the priority of voice signals within the Passport 4400 priority hierarchy.
Setting the txPriority number for voice
To set the priority number for voice, enter:
CLI> set voice switchingProfile txPriority
| Parameter | Range of Values | Required Action |
|---|
| <Profile> | Passport 4430/50/55
INTEGER (1..32) Passport 4460
INTEGER (1..60) | Enter the number of the switching profile you are configuring. |
| <TxPriority> | INTEGER (0..15) | Select a number from 0 to 15, where 0 is the lowest priority and 15 is the highest priority. Typical priority setting for voice is 11. |
End of Topic
