To assign a voice parameter profile to a channel, enter the following commands:
CLI> set voice parameters profileID
Parameters
Range of Values
Required Action
<CardNumber>
limB | limC | limD | limE
Enter the slot number of the desired voice module
<ChannelNumber>
INTEGER (1..12)
Enter the voice channel number for the desired voice module (maximum for analog is 2)
<ProfileID>
INTEGER (1..32)
Enter the number of the voice profile you are assigning to that channel.
exp1 | exp2
INTEGER (1..30)
Enter the voice channel number for the desired voice module.
INTEGER (1..60)
End of Topic
End of Topic
