Configurator Procedure for Setting the Voice Profiles (4430/50/55)

To set the voice profile for a voice module, use the Configurator procedures below:

1. Select Configure, Voice, and Channels from the navigation window.



You will see the Voice Channels window:



2. At Voice Profiles (Common Parameters), select the profile you want to configure and click the Modify button. The Voice Profile window opens:



3. Click on the Save button when all desired common parameters have been entered.
4. Click on the Next and Previous buttons to configure the common parameters for more voice profiles.
5. At the top of the window, click on Voice Channels. You will see the Voice Channels window:



6. At Voice Profiles (Interface Specific Parameters), select the profile you want to configure and click the Modify button. You will see the Voice Profile (Interface Specific Parameters) window:



7. Click on the Save button when the desired parameters that relate to the interface you are configuring have been modified.
8. Click on the Next and Previous buttons to configure the interface specific parameters for more voice profiles.

The optional parameters for the Voice Profiles (Common and Interface Specific Parameters) are listed and described below:

End of Topic