Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index#

Configure Data Compression on the Local Passport 4400 Unit

  1. Enable data compression.

    2. CLI> define fr system switchDC enable

  2. Configure the Local Passport 4400 unit.

    3. CLI> define fr line user baseDLCMI negModeDCDef

    Parameter

    Range of Values

    Required Actions

    <IfIndex>

    INTEGER (1..255)

    Enter the IfIndex of the port you want enabled for data compression.

    <DCNegMode>

    noCompression | frf9Standard | nortelProprietary

    Enter the applicable mode.


    Example:

    CLI> define fr line user baseDLCMI negModeDCDef 2 nortelProprietary

  3. Reset the Passport 4400 unit.

    4. CLI> reset system cpu reset

For additional data compression parameters see Virtual Ports.

End of Procedure

End of Topic

End of CLI procedures for Configuring LAN Services

Nortel Networks LogoContact us by email
Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index