Procedure for Configuring Physical Ports and DLCIs

This section describes the Configurator and CLI procedures for configuring physical ports and DLCIs.

Configurator Procedure for Configuring Physical Ports and DLCIs

CLI Procedure for Configuring Physical Ports and DLCIs

Before You Begin

You will need to obtain the following information from your network administrator:

• The DLCI (assigned for connections over a frame relay network).
• LMI type of the frame relay network.
• DTE and DCE maximum frame size for the Passport network connection.
• Baud rate (physical line speed) for the Passport network connection.
• Maximum DLCI value for the Passport network connection.