CLI Commands for Input of Committed Information Rate (CIR) Data

The following CLI commands are used to input CIR data:

CLI> define fr tunnel

The following is a list of options that are used to configure CIR data:

Options	Description
maxRxCIR	The maximum receive CIR (in bits/sec) for this PVC tunnel.
maxTxCIR	The maximum transmit CIR (in bits/sec) for this PVC tunnel.
minTxCIR	The minimum transmit CIR (in bits/sec) for this PVC tunnel.

Example:

CLI> define fr tunnel maxRxCIR

Parameter	Range of Values	Required Action
<IfIndex>	INTEGER (1..255)	Enter the TunnelIfIndex of the netlink established in Step 10 of CLI Procedure for Configuring Physical Ports and DLCIs.
<maxRxCIR>	INTEGER (0..256000)	Enter the maximum receive CIR for this PVC tunnel.

Example:

CLI> define fr tunnel maxRxCIR 15 553

Note: Maximum receive/transmit is the maximum receive/transmission rate of the frame size sent out through the PVC tunnel.

Save the configuration of the Passport 4400 and restart the unit.

CLI> save configuration update

CLI> reset system current reset

End of Procedure

End of Topic

End of CLI procedures for Configure Passport Connections