Displaying Configured ISDN Peer Entries

1. To display the configured ISDN peer entries, select Configure, Physical Interfaces, and ISDN from the navigation menu.



You will see the Physical Interface (ISDN) window.

2. Use the pull down menu to select the applicable port. You will see the Physical Port Configuration (ISDN) window.
3. Click Next. You will see the Physical Basic Rate Interface Configuration window:



4. At the top of the window, click on Configure ISDN Service. You will see the Configure ISDN Service - Dial Control Peer window:

This table displays Peer configurations. If there is an ISDN entry already configured for the interface in question, you can modify it by clicking Modify next to the applicable Peer ID Index. See Optional ISDN Parameters for a list of parameters that may be altered.

Continue on to Add an ISDN Peer Entry