CLI Command for Setting the DS0 Connection

To set the DS0 Connection, enter the following command:

CLI> set csu e1 ds0Connection or set csu t1 ds0connection

Parameter	Range of Values	Required Actions
<IfIndex>	INTEGER (1..255)	Enter the IfIndex of the port you are configuring the connection on.
<DS0Connection>	"String" of range (1..30)	Enter a list or range of DSO channel numbers with quotes (" "). This string may contain up to 30 characters.

DSO Connection Parameter	Actual Frame Time Slots Used by the System
1-15	1-15
16-30	17-31

Note: Time Slot 16 cannot be used as a B-channel to carry data. You must ensure your service provider does not use this channel.

Examples:

CLI> set csu e1 ds0connection 150 "1,2,4,5,6,7,8,9"

CLI> set csu t1 ds0connection 150 "1,2,4,5,6,7,8,9"