Accessing the Command Line Interface (CLI) Through Configurator

Note: Configurator does not have control over which Telnet application your system uses.

The Configurator allows you the convenience of using or referring to the CLI. To access the CLI:

1. Click on Utilities.
2. Click on Telnet.
3. Click on Connect and select the IP address of the Passport 4400 unit you wish to access.



4. At the Login prompt, type cli.
5. At the Password prompt, press [Enter].



You are now logged into the CLI.

Exiting the CLI

To exit the CLI, refer to Exiting the CLI.

End of Procedure

Configurator Navigational Tips