Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index#

Downloading HTML Stand-Alone Configurator Web Pages

Use the procedure below to download the stand-alone HTML Configurator Web pages:

  1. Use your web browser to access URL http://www.nortel.com/nic.

  2. In the navigation menu, select Login to the System.

  3. Enter your User Name and Password. Please ensure that your login is typed in lower case. Click OK.
  4. Scroll down until you locate the link for the Configurator HTML pages. Click on the link.
  5. Click your right mouse button and select Save As or Save Image As. Download the file to a PC or Workstation with a TFTP Server.

    6. Note

    Note: The PC or Workstation must be accessible across the LAN by the Passport 4400 unit that is downloading the HTML file.


  6. Use your web browser to log on to the Configurator Web pages from the PC or Workstation connected to the Passport 4400 unit.
  7. From the navigation menu in Configurator, click on Administration.
  8. Click on TFTP Operation. The TFTP Operation window opens:

  9. In the Server IP Address field, enter the IP address of the PC or Workstation that is running the TFTP server where the HTML file is residing.

    10. Note

    Note: The file should be placed in the /tftpboot/directory. Configurator uses this as the top level directory, which does not need to specified when setting the file name.


  10. Click Save. A "Command Successful" appears.
  11. At the top of the window click on Code Download. The TFTP Code Download window opens:

  12. Enter the path name of the HTML file on the TFTP server (i.e.44xx/4.0/<filename>). Click on Download (from Server).

    13. The downloading HTML file will be placed in the committed code bank. For information about committed code banks, go to System Utilities.

    The TFTP Status page displays progress of the download.

  13. You must reset the Passport 4400 unit. At the top of the TFTP Status window, click on System Reset. The System Reset window opens:

  14. Use the pull down menu to select CPU only. Click Reset. A Confirmation message displays:

    15. Click OK. A display shows you the reset progress.

End of Procedure

Accessing the Command Line Interface (CLI) Through Configurator

Nortel Networks LogoContact us by email
Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index