CLI Access Procedure

After the Passport 4400 has been powered up and the boot sequence has completed, a login prompt is displayed on the local management screen of your terminal.

Note: If the login prompt is not displayed, press [Enter] one or more times until it is displayed.

To access the CLI:

1. Press [Enter] several times until the login: prompt is displayed.
2. Type cli and press [Enter]. The password prompt is displayed.
3. Press [Enter] again. A welcome message appears followed by the CLI> prompt.

You are now logged in to the CLI.

Exiting the CLI

To exit the CLI:

1. At the Host name prompt, type lo. A termination window opens:



2. Click OK.
3. Click the Connect tab and select Exit. You are now logged out of the CLI.

End of Procedure

CLI Command Structure