| MaxNumberOfDLCI | The maximum number of DLCI that may be configured for this access device. |
| MaxVirtualPort | The maximum number of ports that may be configured for this access device. |
| MaxDLCIPerLine |
The maximum number of DLCIs that may be configured for a frame relay
line.
|
| NumberingPlan | The numbering plan used with the DNA. The type of call is either E.164 or X.121. |
| PanlLmiTrap | Shows the enabled/disabled status of the trap messages for the frame relay PANL LMI module. |
| MsmTrap | Shows the enabled/disabled status of the trap messages for the frame relay MSM module. |
| CoreTrap | Shows the enabled/disabled status of the trap messages for the frame relay core module. |
| PlmTrap | Shows the enabled/disabled status of the trap messages for the frame relay PLM module. |
| DCSwitch | Global configuration for data compression. Choose enable or disable. |
| VoiceOverBooking | Voice overbooking is not allowed by default. This means the system will check the tunnel bandwidth (MaxTxCIR) before it supports the call. For example, for a 64K bandwidth, the system can only support up to 5 calls. The 6th call will be rejected. When it is set to allowed, the system will not perform this check. |
