| IfIndex | The IfIndex of the local frame relay interface. (IfIndex 155 corresponds to the frame relay portion of the local DTE interface at Port 2 of the Ethernet Base Module.) |
| TxInfoRateAdjust | Delta time interval to increase or decrease the transmit rate by monitoring the number of frames received or transmitted with the FECN bit cleared or set. |
| InfoRateAdjInterval | The number of seconds during which received frames are checked to see whether the FECN bit is set or cleared. The transmit rate is adjusted based on the number FECN bits set or cleared during this interval. The range is from 1 to 255 seconds. |
| InfoRateAdjTriggNum | Number of consecutive frames that must have the BECN bit set before reducing transmit rate. |
| TxThroughput | The transmission CIR expressed in bits/sec. |
| RxThroughput | The receive CIR expressed in bits/sec. |
| TxMaxFrameSize | The maximum transmission FR packet size expressed in bytes. |
| RxMaxFrameSize | The maximum receive FR packet size expressed in bytes. |
| RateEnforcement | The rate enforcement enabled or disabled parameter for FR congestion management processing. |
| TxBc | The transmission committed burst size expressed in bits. |
| RxBc | The receive committed burst size expressed in bits. |
| TxBe | The transmission excess burst size expressed in bits. |
| RxBe | The receive excess burst size expressed in bits. |
| DCDefNegMode | Defines the negotiation mode supported. |
| DCDefRetryTime | Timeout value for DC negotiation. |
| DCDefRetryCount | Retry counter for data compression negotiation. |
