| IfIndex | The LLC2 interface index value of the specific entry. |
| Type | This parameter identifies the underlying interface used by LLC2 as either an ethernet port or a BAN encapsulated PVC. |
| PortName | An octet string used to identify the physical or virtual port on which this interface exists. The name may contain only ASCII printable characters and must be unique within the administered system. |
| T2AckDelayTimer | The default acknowledgment timer for this interface. This specifies the maximum time in milliseconds to wait before sending an acknowledgment for a sequenced PDU. A value of zero means there will be no delay in acknowledgment generation. |
| AckTimer | The maximum time, in milliseconds that LLC2 expects an acknowledgement to a transmitted I-frame. |
| RcvWindow | The default receive window size. This represents the maximum number of unacknowledged I-frames that may be received. A value of zero would cause the system to use a default value determined by the switching. |
| PbitTimer | The time (in milliseconds) to wait for a response to a frame sent with the poll bit set. |
| RejTimer | The time (in seconds) to wait for a response to a reject frame. |
| BusyTimer | The time (in seconds) that LLC2 waits for indication of clearance of a busy condition at the adjacent link station. |
| InactTimer |
The time (in seconds) that an RR "keep alive" frame is sent on an otherwise
idle link.
|
| XIDTimer | Period in seconds between XID retries. |
| XIDRetries | Maximum number of XID retries. A value of 65535 indicates that the XID retries will occur indefinitely. |
| TESTTimer | Period in seconds between TEST retries. |
| TESTRetries | Maximum number of TEST retries. A value of 65535 indicates that the TEST retries will occur indefinitely. |
| NewWindowAcks | Number of I-frames that must be acknowledged before the dynamic window algorithm increments the current working window size. |
| MaxRetries | The maximum number of times an attempt is made to retransmit a response across the interface. This value applies to llcPortAckTimer, llcPortPbitTimer, llcPortRejTimer and llcPortBusyTimer. |
| LocalRingNum | Displays the number of the ring to which the LAN device is attached. This is for token ring networks only. |
