Verb

Definition

confirm (rollback)

Use confirm to prevent the Passport 4400 unit from resetting to the configuration data and/or code which was working before changes were made. Rollback is a service whose primary function is to prevent the Passport 4400 unit from becoming unreachable from the rest of the network because of new configuration or code, including delete functions. It can be enabled or disabled, and is disabled by default. When rollback is enabled and a code or configuration bank change occurs, rollback will cause the Passport 4400 unit to enable the timer after a reboot. Once the reboot occurs, the timer begins and the user must confirm the rollback with the command <confirm rollback confirm>.

download

Downloads software from a host device to the Passport 4400 unit. It is used to update existing software.

logout

Use logout to log out of, or exit, the CLI.

ping

Use ping to poll any remote unit with an IP address. You can ping the network management core router from any of the branches.

reset

Reset allows start up with the currently configured parameters or with the factory defaults upon reset. Reset has two applications.

When used with the counters argument, reset clears the counters maintained by the Passport 4400 unit.

When used with the system argument, reset causes the Passport 4400 unit to start over from a predefined point. Reset system is used with additional arguments to reset specific Passport 4400 unit services.

upload

The upload command is used to transfer command data to a specified file location.