<IfIndex>

:INTEGER (1..255)

Indicates the IfIndex of the port you are setting for bridging.

<Priority>

:INTEGER (0..255)

Indicates the value which is used to assign priority to the specified port. Priority is based on packet size and interface type. The priority field consists of the first octet of the bridge port ID.

<PathCost>

:INTEGER (1..65535)

Path cost, which is a value based on hop count (number of single links between two devices on a network), is used to compare paths through the network environment. This value is used by the routing protocols to determine the most favorable path to a particular destination. Obtain this number from your system administrator.

<Type>

:ethernet | frameRelay

Choose ethernet if you are customizing a setting on the ethernet port. Choose frame relay if you are customizing the WAN port.

<Status>

:enabled | disabled

Choose enabled if you want to view the port's status; otherwise choose disabled.