Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index#

add ipx circuit

Use add ipx circuit to add Internetwork Packet Exchange (IPX) circuits and route values to your Novell network.

Object 

Parameter

Description

<SysInstance>

:INTEGER (1 only)

The value for SysInstance must be set to 1. Note:

<CircuitIndex>

:INTEGER (1. .16)

Indicates the identification number assigned to the circuit.

<IfIndex>

:INTEGER (1. .255)

Indicates the number for the circuit port.

<CircuitName>

:"String" (0. .48)

Indicates an optional name which you assign to the circuit.

<DataLinkType>

:raw | snap | type2 | type8022

Choices are protocol types: raw indicates no special protocol used; snap (Subnetwork Access Protocol) operates between a network entity in the subnetwork and a network entity in the end system. The SNAP entity in the end system makes use of the services of the subnetwork and performs three key functions: data transfer, connection management and QOS selection; type2 indicates an IEEE 802.2 (LLC) connection-oriented operation upgrade; type 8022 indicates an IEEE 802.2 (LLC) connection-oriented operation.

<NetNumber>

:NetNumber (0x01 - 0xFFFFFFFE)

Indicates the hexadecimal value for the network.


Nortel Networks LogoContact us by email
Go back one pageGo to the next page#Go to this book's Table of ContentsGo to this book's Index