Use add fr port spvcLANData to add the corresponding switched permanent virtual port on the frame relay interface. Specify the virtual port IfIndex, the identifier and the Device (or Data) Network Address (DNA) of the Switched Virtual Circuit (SVC). This command will not take effect until the unit is reset.
| Object | Parameter | Description |
|---|---|---|
| <VirtualPortIfIndex> | :INTEGER (1..255) | Indicates the IfIndex of the virtual port associated with the SPVC. |
| <RemoteNet> | :INTEGER (16..991) |
Identifies the remote net DLCI. |
| <SVCDNA> | :Frame Relay DNA (as a quoted string) (1..34) |
Indicates the remote DNA of the SVC. Refer to |
| <ConnectType> | :slave | master | One end of the SPVC must be set as master, the other end must be set as slave. Master initiates the call and slave receives the call. Note: It is recommended that you set the Passport 4400 unit as the master and the Passport 6400 unit as the slave for quicker service recovery. |
  |
|
Getting Started